****************************************************************************** **************** D720201 & D720202 Design Resources Release ****************** ****** All of the Software is under NDA or Software license agreement ******** ****************************************************************************** Release Note February.16.2011 Renesas Electronics uPD720201 & uPD720202 USB 3.0 Host Controller ROM Writing tool for Windows Command Line TOOL Version 2.0.0.0 : February 16th, 2012 Copyright (c) 2011-2012 Renesas Electronics Corportaion. All Rights Reserved. ------------------------------------------------------------------------------ Note1: If the file name is changed, this tool does not work. Note2: This tool is for the following devices. - uPD720201 ES2.0 sample whose revision ID of PCI Configuration Register is 2h. - uPD720201 ES2.1 sample & CS sample & Mass product whose revision ID of PCI Configuration Register is 3h. - uPD720202 ES 2.0 sample & CS sample & Mass product whose revision ID of PCI Configuration Register is 2h. Note3: Please use FW file for uPD720201/uPD720202 released at 2012/02/01. This version is v2.0.1.0. -------------------------------------------------------------------------- Table of Contents -------------------------------------------------------------------------- 1. Release Files 2. History -------------------------------------------------------------------------- 1. Release Files -------------------------------------------------------------------------- Date Time Size File Name Version -- x64 2012/02/17 15:36 1KB cfg_201_v2.ini 2012/02/17 15:36 1KB cfg_202_v2.ini 2009/05/29 16:07 1KB testeui.eui 2011/12/07 09:57 128KB W201FW20.exe 2.0.0.0 2011/12/07 09:57 152KB xhc201w.dll 2.0.0.0 2011/12/07 09:57 31KB xhc201w.sys 2.0.0.0 -- x86 2012/02/17 15:36 1KB cfg_201_v2.ini 2012/02/17 15:36 1KB cfg_202_v2.ini 2009/05/29 16:07 1KB testeui.eui 2011/12/07 09:58 120KB W201FW20.exe 2.0.0.0 2011/12/07 09:58 130KB xhc201w.dll 2.0.0.0 2011/12/07 09:58 29KB xhc201w.sys 2.0.0.0 The cfg_201_v2.ini, cfg_202_v2.ini, and testeui.eui files are the same for both x64 and x86. They are duplicated in both directories so that W201FWxx.exe will find them in the same directory as the associated version of W201FWxx.exe. -------------------------------------------------------------------------- 2. History -------------------------------------------------------------------------- -------------------------------------------------------------------------- Version 2.0.0.0 : February 16, 2012 -------------------------------------------------------------------------- - Updated the configuration file(.ini). -------------------------------------------------------------------------- Version 2.0.0.0 : December 8, 2011 -------------------------------------------------------------------------- - Supported the uPD720201 ES2.1 whose Revision ID in the PCI Configuration register is 3h. -------------------------------------------------------------------------- Version 1.1.0.0 : November 14th, 2011 -------------------------------------------------------------------------- - Fixed the problem of [FWUpdateProperty]. Problem: When [FWUpdateProperty] is set to '0', FW Updater that doesn't include SSID & SVID (Target Systems) cannot update the firmware. Explanation of FWUpdateProperty usage: (a) The FWUpdateProperty can be set or cleared when the ROM is programmed by the command-line tool. This setting affects the usability of the Windows FWUpdaterTool. (b) If the FWUpdateProperty has been set to '1', then only a FWUpdaterTool containing the matching SSID/SVID codes can update the ROM. This helps to discourage unauthorized updating of ROM firmware by other versions of the FWUpdaterTool. (The ROM Write Tools can always update the ROM, but those tools aren't intended to be released to the field.) (c) If the FWUpdateTool contains a list of authorized SSID/SVID codes, then it can't be used on systems that don't have the specified SSID/SVID codes. This helps to prevent the FWUpdaterTool from being used on unintended Target Systems. (d) If the manufacturer doesn't care about restricting the FWUpdaterTool usage, the FWUpdateProperty can be set to '0' by the command-line tools. Then a version of FWUpdaterTool that has no SSID/SVID list can update the ROM on that system regardless of SSID/SVID. Refer to the Application Note, ISG-NK1-110012_AN_001_FW-Updater-Generator.pdf, for additional explanation of FWUpdateProperty usage and how to create a FWUpdaterTool. -------------------------------------------------------------------------- Version 1.0.0.0 : October 19th, 2011 -------------------------------------------------------------------------- - First Major Version Released. --------------------------------------------------------------------------