   |
SM951 Series
(M.2 PCIe Gen3 SSD)
|
|
SAMSUNG M.2 (NGFF) PCIe Gen3 SSD
SM951 Series (NVMe)
SM951-NVMe-512G
Unit price: USD 470. |
|
|
| PART NUMBER |
SM951-NVMe-512G
(MZVPV512HDGL) |
 |
| Capacity1) |
512GB |
| LBA2) |
1,000,215,216 |
Warranty Policy:
Our web shop follow Samsung Warranty Policy.
The warranted period will be count 11 Months after SAMSUNG production date.
Customer are responsible for the freight shipping back and forth. |
|
SM951-NVMe-256G
Unit price: USD 255. |
|
|
| PART NUMBER |
SM951-NVMe-256G
(MZVPV256HDGL) |
 |
| Capacity1) |
256GB |
| LBA2) |
500,118,192 |
Warranty Policy:
Our web shop follow Samsung Warranty Policy.
The warranted period will be count 11 Months after SAMSUNG production date.
Customer are responsible for the freight shipping back and forth. |
|
SM951-NVMe-128G
Unit price: USD 140. |
|
|
| PART NUMBER |
SM951-NVMe-128G
(MZVPV128HDGM) |
 |
| Capacity1) |
128GB |
| LBA2) |
250,069,680 |
Warranty Policy:
Our web shop follow Samsung Warranty Policy.
The warranted period will be count 11 Months after SAMSUNG production date.
Customer are responsible for the freight shipping back and forth. |
|
Heat Sink 2x1.5cm
Unit price: USD 2. |
|
|
Heat Sink 2x1.5cm 5pcs
 |
|
SM951 Series (NVMe)
| FEATURES |
Environmental Specifications |
- PCIe Gen3 8Gb/s Interface, up to 4 Lanes
- Compliant with PCI Express Base Specification Rev. 3.0
- Compliant with NVMe Express specification. Rev.1.1a
- Power Saving Modes:
-Supporting APST
-Supporting L1.2 Mode
- Support Admin & NVM Command Set
- End-to-End Data Protection
- RoHS Compliant
- Support up to 1 Namespaces
- Support up to 8 I/O Queues
- Support up to 16K Queue entries for each I/O Queue
|
Temperature (Tc4)
- Operating 0°C to 70°C
- Non-operating -40°C to 85°C
Humidity (non-condensing)
- Non-operating 5 ~ 95 %
Linear Shock (1/2 sine pulse, 0.5ms)
- Non-operating 1,500 G
Vibration (sine swept, 10~2000Hz, 15min/axis, 3axis)
- Non-operating 10 ~ 2000 Hz : 20G
|
| Drive Configuration |
Electrical Specifications |
- From Factor: M.2
- Interface: PCIe Gen3 8Gb/s x4
- Bytes per Sector: 512 Bytes
|
- Supply Voltage: +3.3V ± 5%
- Voltage Ripple/Noise (max.): 100mV p-p
- Active (typical): 6.5W
- Idle (typical): 50mW
- L1.2 (Typ): 2mW
|
| Performance Specifications |
Physical Dimension |
Data Transfer Rate(128KB)
- Sequential Read: (128GB) Up to 2000 MB/s
- Sequential Read: (256GB) Up to 2150 MB/s
- Sequential Read: (512GB) Up to 2150 MB/s
- Sequential Write: (128GB) Up to 650 MB/s
- Sequential Write: (256GB) Up to 1260 MB/s
- Sequential Write: (512GB) Up to 1550 MB/s
Data I/O Speed(4KB)
- Random Read :
(128GB/256GB/512GB) Up to 100K IOPS
- Random Write :
(256GB/512GB) Up to 100K IOPS
(128GB) Up to 83K IOPS
|
- Width: 22.00 ± 0.15 mm
- Length: 80.00 ± 0.15 mm
- Height:
(Double Side) Max 3.73 mm
(Sigle Side) Max. 2.38 mm
- Weight
Up to 10 g
|
| Reliability Specifications |
Specifications are subject to change without notice. |
- UBER: < 1 sector per 1015 bits read
- MTBF: 1.5 Million Hours
|
1)1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes, Unformatted Capacity.
User accessible capacity may vary depending on operating environment and
formatting.
2) 1 Sector = 512Bytes, Max. LBA represents the total user addressable sectors in LBA
mode and calculated by IDEMA rule
3) Actual performance may vary depending on use conditions and environment.
4) Tc is measured at the surface of NAND Flash package. |
|
SM951 Series (AHCI)
| FEATURES |
Environmental Specifications |
- PCIe Gen3 8Gb/s Interface, up to 4 Lanes
- Compliant with PCI Express Base Specification Rev. 3.0
- Support Standard AHCI driver
- Power Saving Modes:
-Supporting APM
-Supporting L1.2 Mode
- Support NCQ (Up to 32 depth) Command Set
- Support SSD Enhanced S.M.A.R.T. Feature Set
- Support TRIM Command
- End-to-End Data Protection
- RoHS Compliant
|
Temperature
- Operating 0°C to 70°C
- Non-operating -40°C to 85°C
Humidity (non-condensing)
- Non-operating 5 ~ 95 %
Linear Shock (1/2 sine pulse, 0.5ms)
- Non-operating 1,500 G
Vibration (sine swept, 10~2000Hz, 15min/axis, 3axis)
- Non-operating 20G
|
| Drive Configuration |
Electrical Specifications |
- From Factor: M.2
- Interface: PCIe Gen3 8Gb/s x4
- Bytes per Sector: 512 Bytes
|
- Supply Voltage: +3.3V ± 5%
- Voltage Ripple/Noise (max.): 100mV p-p
- Active (typical): 6.5W
- Idle (typical): 50mW
- L1.2 (Typ): 2mW
|
| Performance Specifications |
Physical Dimension |
Data Transfer Rate(128KB)
- Sequential Read: (128GB) Up to 2000 MB/s
- Sequential Read: (256GB) Up to 2150 MB/s
- Sequential Read: (512GB) Up to 2150 MB/s
- Sequential Write: (128GB) Up to 600 MB/s
- Sequential Write: (256GB) Up to 1200 MB/s
- Sequential Write: (512GB) Up to 1500 MB/s
Data I/O Speed(4KB)
- Random Read : (128GB/256GB/512GB) Up to 90K IOPS
- Random Write : (128GB/256GB/512GB) Up to 70K IOPS
|
- Width: 22.00 ± 0.15 mm
- Length: 80.00 ± 0.15 mm
- Height:
(Double Side) Max 3.73 mm
(Sigle Side) Max. 2.38 mm
- Weight
Up to 10 g
|
| Reliability Specifications |
Specifications are subject to change without notice. |
- UBER: < 1 sector per 1015 bits read
- MTBF: 1.5 Million Hours
|
1) 1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes, Unformatted Capacity.
User accessible capacity may vary depending on operating environment and
formatting.
2) 1 Sector = 512Bytes, Max. LBA represents the total user addressable sectors in LBA mode and calculated by IDEMA rule |
|
|
|
